XJ-8L Sedan (X308) V8-4.0L (AJ27) (2001)
/v8-4.0l_(aj27)/Page-873001.png)
Wheel Speed Sensor: Service and Repair
Rear
Wheel Speed Sensor - Rear
Removal
1. Raise rear of vehicle and support on stands.
2. Remove wheel speed sensor.
^
Disconnect harness connector.
^
Remove bolt.
3. Clean components and mating surfaces.
Installation
1. Install wheel speed sensor.
^
Position sensor.
^
Install and tighten bolt to 8 - 10 Nm.
^
Connect harness connector.
2. Remove stands and lower vehicle.
