XJ-8L Sedan (X308) V8-4.0L (AJ27) (2001)
/v8-4.0l_(aj27)/Page-403004.png)
6. Fit the coolant header tank.
1. Reposition the tank and fit the securing nuts.
2. Connect the harness connector
7. Refit the centre trim panel and the left hand enclosure panel to the engine compartment.
1. Refit the centre trim panel.
2. Refit the left hand enclosure panel.
8. Raise the ramp.
9. Tighten the mounting bracket securing bolts.
10. Fit the front muffler.
11. Lower the ramp.
12. Remove the paintwork protection sheets and close the engine cover.