XJ-8L Sedan (X308) V8-4.0L (AJ27) (2001)
/v8-4.0l_(aj27)/Page-1076001.png)
Control Assembly: Procedures
AIR CONDITIONING PANEL
Removal
1. Move 'J' gate selector to position 'D'.
2. Remove battery cover and disconnect ground cable from battery terminal.
3. Remove 'J' gate finisher. See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair/Procedures
4. Remove 'J' gate finisher retaining plate. See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair/Procedures
5. Remove centre console veneer panel. See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair/Procedures
6. Remove radio and console. See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair/Procedures
7. Disconnect air conditioning panel flying lead multiplug (blue) in LH side of transmission tunnel.
8. Slacken and remove remaining screw securing air conditioning panel console to BIW.
