XJ-S Convertible (XJ27) V12-6.0L (1994)
/v12-6.0l/Page-1027002.png)
Illustration 1
2.
Align the guard as shown in Illustration 1 and replace the lower bolt
FITTING LATCH BACK PLATES:
1.
Mark the position of both hood latches on the engine compartment bulkhead.
Illustration 2
2.
Remove the two bolts holding the left side latch assembly to the bulkhead (Illustration 2).
3.
Free the release cable from the latch back plate, then remove and discard the back plate.
Illustration 3
