XJ-Super V8 (X308) V8-4.0L SC (AJ27) (2002)
Rear Door Panel: Service and Repair
Rear Door Window Control Switch Finish Panel
Rear Door Window Control Switch Finish Panel (76.47.34)
Removal
1. Remove door casing veneer panel.
2. Remove door casing.
3. Remove door armrest and remove switch/ashtray assembly from armrest.
4. Slacken and remove screws securing veneer panels to door glass switch/ashtray assembly.
5. Remove veneer panels from switch/ashtray assembly.
Installation
1. Position veneer panel over switch/ashtray assembly and fit and tighten securing screws.
2. Position switch/ashtray assembly on armrest and fit and tighten the two securing screws.
3. Fit armrest to door casing.
4. Fit casing to door.