XJ-Super V8 (X308) V8-4.0L SC (AJ27) (2002)
20. RHD vehicles. Sever and discard tiestrap securing harness to steering rack.
21. Route harness from behind steering return pipe.
22. Position a drain receptacle below pinion housing.
23. Remove pipe retaining plate securing bolt and withdraw plate.
24. Drain power steering fluid.
^
Disconnect pipes and allow fluid to drain.
^
Remove and discard 'O'-ring seals from pipe connectors.
^
Fit blanking plugs to pipe connectors and pinion housing ports.
25. Remove drain receptacle.
26. Remove pipe support from steering rack.
^
Release return pipe from support.
^
Remove support from rack.
27. Ensure that steering is in central position.
28. Release lower steering column from pinion shaft.
1. Remove lower steering column securing nut and bolt.
^
Move column upwards to release it from pinion shaft.