XJ-Super V8 (X308) V8-4.0L SC (AJ27) (2002)
Rear Subframe Mount: Service and Repair
Rear Axle Crossmember Bushing (64.25.02)
Special Service Tools
Removal
CAUTION: Replacement of nuts and bolts: Various thread-locking devices are used on nuts and bolts throughout the vehicle. These devices
restrict the number of times a nut or bolt can be used.
1. Remove suspension subframe from vehicle.
2. Position special tool 204-116 on the press-bed, with recesses uppermost.
3. Remove nut and washer from tool.
-
Position tool on bush with recesses accommodating the bush rebound stops.
-
Fit washer to tool and fit and finger tighten nut.
4. Invert subframe and position assembly on special tool 204-116, with subframe located in the recess.