XJ-Super V8 (X308) V8-4.0L SC (AJ27) (2002)
2. Noting identity of multiplugs as marked during removal, connect harness multiplugs to heater switches.
3. Position switches in console extension and fit and tighten retaining screw.
4. Position and fully seat extension at rear of console and fit and tighten securing screws.
5. Carefully fit veneer panel to rear extension.
Centre Consol Cupholder Assembly
Removal
1. Remove the console glove box lid. See: Centre Console Glovebox Lid
2. Slacken and remove the ten inner lid securing screws and remove the inner lid.
3. Slacken and remove cupholder latch securing screw and remove latch assembly.