XJ-Super V8 (X308) V8-4.0L SC (AJ27) (2002)
4. Slacken and remove glovebox liner rear securing screws.
5. Remove glovebox liner from vehicle.
Installation
1. Position glovebox liner in console.
2. Fit and tighten liner rear securing screws.
3. Position latch assembly on liner and fit and tighten securing screws.
4. Fit and tighten check arm to lid securing screw.
5. Position lid to stay and fit and tighten securing screw.
6. Close glovebox lid.
Centre Console Glovebox Lid
CENTRE CONSOLE GLOVEBOX LID
Removal
1. Open glovebox lid.
2. Slacken and remove lid stay securing screw and remove stay from lid.