XJ-Super V8 (X308) V8-4.0L SC (AJ27) (2002)
4. Fit draught welts to adjacent door aperture flanges.
5. Fit seat belt upper and lower anchorages.
6. Return seat to original position.
Passenger Side Cantrail and Upper 'A' Post Trim Pad
PASSENGER SIDE CANTRAIL AND UPPER 'A' POST TRIM PAD
Removal
1. Remove front and rear grab handles. See: Passenger Assist Handle/Service and Repair
2. Remove draught welt from adjacent section of door aperture flange.
3. Using a trim removal tool, carefully ease the six trim pad fir tree fasteners from cantrail and upper 'A' post locations.
4. If premium ICE is fitted, carefully withdraw trim pad for access and disconnect tweeter connectors.
5. Remove trim pad from vehicle and remove tweeter.
6. Remove and discard fir tree fasteners.
Installation
1. Fit new fir tree fasteners to the trim pad.
2. Fit tweeter to trim pad.
3. Position trim pad for access and connect tweeter to harness.
4. Commencing at top of 'A' post and working rearwards, fully seat three fir tree fasteners.
5. Fully seat remaining three fir tree fasteners in upper 'A' post.
6. Fit front and rear combined grab handles. See: Passenger Assist Handle/Service and Repair
7. Fit draught welt to adjacent section of door aperture flange.
Pinic Tray Top Rail Veneer Panel, Daimler and Vanden Plas Model
PICNIC TRAY TOP RAIL VENEER PANEL, Daimler and Vanden Plas Models
Removal
1. Move picnic tray to fully down position.