XJ-Super V8 (X308) V8-4.0L SC (AJ27) (2002)
5. Sever and remove motor/cover bag to seat frame tie straps.
6. Release motor/cover bag from seat vertical support rod.
7. Sever and remove tie straps securing lumbar support bag to squab suspension and guiding bag through squab suspension, remove motor/bag
assembly.
Installation
1. Position motor/bag assembly in seat and pass lumbar support bag through squab suspension.
2. Using new tie straps, secure lumbar support bag to squab suspension.
3. Position new tie strap on seat vertical support rod.
4. Position motor/bag assembly on seat frame support rod and fit and tighten tie strap to secure.
5. Connect motor harness multiplug and fully seat in mounting bracket.
6. Fit seat back finisher.
7. Connect ground cable to battery terminal and fit battery cover.
8. Return seat to original position.
Lumbar Support Motor Front Seat - Daimler
Lumbar Support Motor Front Seat - Daimler
Removal
1. Power seat fully forward and position squab in fully upright position.
2. Remove battery cover and disconnect ground cable from battery terminal.
3. Remove seat back finisher.
4. Remove lumbar support motor harness multiplug (yellow) from mounting bracket and disconnect multiplug.