XJ-Super V8 (X308) V8-4.0L SC (AJ27) (2002)
4. NOTE: Make sure the brake hose does not twist when tightening the hose lock-nut.
Connect brake hose to brake tube.
1. Position hose thread through bracket.
2. Install and tighten locking nut.
3. Install and tighten brake-tube union nut.
5. Remove special tool from brake pedal.
6. Fit wheels.
7. NOTE: Make sure the brake hose is routed correctly.
Remove stands and lower vehicle.
8. Bleed brake hydraulic system.