XJ-Super V8 (X308) V8-4.0L SC (AJ27) (2002)
/v8-4.0l_sc_(aj27)/Page-613002.png)
6. Depress and hold down brake pedal at the specified measurement using special tool.
1. Position tool between brake pedal and seat frame.
2. Turn the tool wheel until the brake pedal is held 60mm down from its released position.
7. Close bleed nipples on both calipers.
^
Remove bleed tubes and containers.
^
Tighten front bleed nipple to 4 - 6 Nm.
^
Tighten rear bleed nipple to 8 - 11 Nm.
8. CAUTION: A new brake hose must be installed when replacing a brake caliper.
