XJ-Super V8 (X308) V8-4.0L SC (AJ27) (2002)
/v8-4.0l_sc_(aj27)/Page-291011.png)
12. Tighten the exhaust camshaft sprocket securing bolt.
Install the chain tensioner tool 303-532 to the sprocket holes.
Apply force to the tool in an anti-clockwise direction to tension the chain on its drive side.
Whilst applying the opposing force to the sprocket and chain, tighten the sprocket securing bolt to 115 - 125 Nm.
13. Tighten the intake camshaft sprocket securing bolt.
Whilst still applying the opposing force to the sprocket and chain (using 303-532), check that the wedges are still in place, tighten the securing bolt
to 115 - 125 Nm.
Remove the chain tensioning tool and the wedge(s).
14. Remove the camshaft locking tool 303-530.
15. Raise the vehicle on the ramp.