XJ-Super V8 (X308) V8-4.0L SC (AJ27) (2002)
28. From engine compartment, remove crossbeam front RH bolts.
29. Remove power steering fluid reservoir for access.
^
Remove reservoir nuts and bolts.
^
Position reservoir for access.
30. From engine compartment, remove crossbeam front LH bolts.
31. CAUTION:
Slowly lower the crossbeam just sufficient to provide the required clearance. Lowering the crossbeam excessively can damage the
suspension and steering pipes.
Carefully lower crossbeam to provide sufficient clearance between front mounting and body.
32. Remove and discard heatshield from front mounting.
Installation