XJ-Super V8 (X308) V8-4.0L SC (AJ27) (2002)
1. Fit the rear muffler and tailpipe assembly.
-
Connect the rear muffler to the intermediate muffler and insert to the Nominal indicator ring.
2. Position and align the rear muffler and tailpipe assembly.
-
Engage the peg with the mounting rubber.
-
Check that the tailpipe position is within the specified settings, adjusting engagement within the Maximum and Minimum indicator rings if
necessary; refer to Specifications.
3. Tighten the securing clamp, rear muffler to intermediate muffler.
4. Lower the ramp.