XJ-Super V8 (X308) V8-4.0L SC (AJ27) (2002)
Headlamp Alignment Actuator: Service and Repair
Headlamp Levelling Actuator
Removal
1. Disconnect harness multiplug from headlamp levelling actuator.
2. Rotate actuator 1/4 turn inwards, tilt forward end downward and withdraw assembly from headlamp
Installation
1. With forward end tilted downward, position actuator assembly on headlamp.
2. Align actuator with headlamp and rotate it 1/4 turn outwards to engage and fully seat.
3. Connect harness multiplug to actuator.
4. Carry out headlamp beam alignment to the appropriate alignment equipment instructions.