XJ-Super V8 (X308) V8-4.0L SC (AJ27) (2002)
/v8-4.0l_sc_(aj27)/Page-741010.png)
23. Install brake calipers.
^
Remove tie supporting brake caliper.
1. Install caliper on carrier.
2. Install guide pins.
3. Install guide pin dust caps.
4. Install caliper spring clip.
24. Install road wheel.
25. Raise vehicle, remove stands and lower vehicle onto road wheels.
26. Ensuring graduation mark remains aligned, finally tighten wishbone rear eccentric bolt to 113-153 Nm.
27. Check wheel alignment and if necessary adjust.
