XJ-Super V8 (X308) V8-4.0L SC (AJ27) (2002)
/v8-4.0l_sc_(aj27)/Page-748020.png)
29. Support weight of crossbeam.
^
Position a jack under crossbeam.
^
Place a piece of wood between jack and crossbeam.
^
Raise jack to just support crossbeam.
30. From engine compartment, remove crossbeam front RH securing bolts.
31. Remove power steering fluid reservoir for access.
^
Remove reservoir securing nuts and bolts.
^
Position reservoir for access.
32. From engine compartment, remove crossbeam front LH securing bolts.
33. Remove crossbeam to engine Hydramount securing bolts.
^
Remove bolt securing crossmember to Hydramount.
^
Fully withdraw bolt into crossmember insert.
^
Repeat procedure to remove and withdraw bolt on opposite side
