XJ-Super V8 (X308) V8-4.0L SC (AJ27) (2002)
1. Install spring pan, new spring and new spring rubber upper and lower seats on Special Tool 204-111.
2. Install Special Tool 204-111 and spring assembly in suspension turret.
^
Position spring assembly and Special Tool in suspension turret.
^
Ensure spring upper rubber seat is correctly positioned and fully seated.
^
Engage tool dowel in turret slot.
3. Position spring pan on lower wishbone.
^
Rotate adjuster of Special Tool to lightly tension spring.
^
Align spring pan with lower wishbone bolt locations.
4. Install suitable guide pins in spring pan/wishbone bolt locations.