XJ-Super V8 (X308) V8-4.0L SC (AJ27) (2002)
3. Install nut securing upper ball joint to vertical link and tighten to 60 - 80 Nm.
4. Position tie rod ball joint taper pin on steering arm and install and tighten securing nut to 71 - 85 Nm.
5. Install wheel speed sensor.
^
Position wheel speed sensor on vertical link.
^
Install sensor securing bolt and tighten to 8 - 10 Nm.
6. Remove wire temporarily securing vertical link to road spring.
7. Install brake disc.