jaguar Workshop Repair Guides

Jaguar XJ-Super V8 (X308) V8-40L SC (AJ27) Workshop Service Manual

Procedures|Page 5657 > < Procedures|Page 5652
Page 1
background image

Rear Door Window Motor: Procedures

Removal

1. Remove lift motor and regulator assembly from door. See: Window Regulator/Front Door Window Regulator/Service and Repair/Procedures

2. Slacken and remove three screws securing motor to regulator.
3. Remove lift motor from regulator.

Installation

1. Position lift motor on regulator and fit and tighten securing screws.
2. Fit lift motor and regulator assembly in door. See: Window Regulator/Front Door Window Regulator/Service and Repair/Procedures

Procedures|Page 5657 > < Procedures|Page 5652