XJ (X350) V8-4.2L (2005)
/v8-4.2l/Page-1475002.png)
8. Remove the rear bumper cover retaining bolts.
9. NOTE: Left-hand shown, right-hand similar.
Remove the rear fender splash shield retaining screw.
10. Remove the bumper cover lower retaining screws.
11. NOTE: Left-hand shown, right-hand similar.
Detach the rear bumper cover.
-
Detach the bumper cover from the retaining clips.
12. Remove the rear bumper.
-
Detach the wiring harness grommet from the rear quarter panel.