XJ (X350) V8-4.2L (2005)
/v8-4.2l/Page-1524003.png)
5.
Rotate the locking collar clockwise and remove the fuel filler flap cable (Illustration 3).
INSTALLATION
6.
Position the new fuel filler flap cable against the fuel filler flap. Align the locking collar to the slots as illustrated.
7.
Rotate the locking collar counter clockwise, to secure the fuel filler flap cable.
8.
Install the fuel filler cap.
9.
Connect the fuel filler flap cable to the fuel filler flap solenoid.
10.
Position fuel filler flap solenoid and secure with connector. Install screw and tighten.
11.
Check the fuel filler flap for correct operation.
12.
Install the REM (see Global Technical Reference GTR Workshop Manual, section: 419-10).
Parts Information:
Warranty Information:
