XJ (X350) V8-4.2L (2005)
Wheel Speed Sensor: Service and Repair
Front
Front Wheel Speed Sensor (70.60.03)
Removal
1. Raise and support the vehicle. Refer to Maintenance/Service and Repair.
2. CAUTION: Make sure the ignition is in the 'OFF' position before disconnecting the front wheel speed sensor electrical connector.
Detach the front wheel speed sensor.
1) Remove the front wheel speed sensor retaining clip.
2) Detach the front wheel speed sensor.
3. Detach the front wheel speed sensor harness.
4. Remove the front wheel speed sensor.
^
Disconnect the electrical connector.
Installation
1. CAUTION: Make sure the wheel speed sensor locating tang is correctly seated in the hub assembly.
CAUTION: Make sure the front wheel speed sensor harness is correctly routed around the front suspension components.
To install, reverse the removal procedure.