jaguar Workshop Repair Guides

Jaguar Workshop Service and Repair Manuals

Brake Caliper|Front|Page 4701 > < Brakes - Caliper Flex Hose Sealing Washer Availability
Page 1
background image

Brake Caliper: Service and Repair
Front

Brake Caliper - Vehicles With: Standard Brakes, VIN Range: G00442->G45703 (70.55.02)

Brake Caliper - Vehicles With: Standard Brakes, VIN Range: G00442->G45703 (70.55.02)

Removal

1. Remove the brake pads.

2. CAUTION:  Brake fluid contains polyglycol ethers and polyglycols. Avoid contact with the eyes. Wash hands thoroughly after handling,

as prolonged contact may cause irritation and dermatitis. If brake fluid contacts the eyes, flush the eyes with cold water or eyewash
solution and seek medical attention. If taken internally do not induce vomiting, seek immediate medical attention. Failure to follow these
instructions may result in personal injury.

CAUTION:  If brake fluid comes into contact with the paint work, the affected area must be immediately washed down with cold water.

CAUTION:  The brake caliper must be supported at all times.

CAUTION:  Cap the brake hose to prevent loss of fluid and dirt ingress.

NOTE:  To prevent the loss of brake fluid, apply the brake pedal hold-down tool and adjust to hold the brake pedal down 40 mm (1.6 in).

Detach the brake hose.

^

Remove and discard the sealing washers.

3. Remove the brake caliper.

^

Remove and discard the brake caliper upper retaining bolt.

Installation

1. CAUTION:  If brake fluid comes into contact with the paint work, the affected area must be immediately washed down with cold water.

Brake Caliper|Front|Page 4701 > < Brakes - Caliper Flex Hose Sealing Washer Availability