XJ (X350) V8-4.2L (2005)
/v8-4.2l/Page-1009004.png)
Installation
1. NOTE: Make sure the parking brake cable is correctly routed.
Install the parking brake release actuator.
^
Tighten to 20 Nm.
2. Attach the parking brake release actuator cable.
1) For right-hand side connector bracket:
^
Reposition the retaining tang.
^
Detach the parking brake cable.
4) For left-hand side reaction bracket, detach the parking brake cable.
3. Reposition the cross brace.
^
Install new cross brace retaining bolts.
*
Tighten rear M8 to 35 Nm.
*
Tighten front M10 to 70 Nm.
4. Raise special tool and align subframe.