jaguar Workshop Repair Guides

Jaguar Workshop Service and Repair Manuals

Parking Brake Cable > < Parking Brake Release Actuator - VIN Range: G00001->G03445 (70.35.45)|Page 4864
Page 6
background image

10. NOTE:  Right-hand shown, left-hand similar.

Attach the muffler and tailpipe to the hanger insulator.

11. Attach the fuel tank filler pipe.

12. NOTE:  Right-hand shown, left-hand similar.

Attach the rear air springs.

^

Tighten to 133 Nm.

13. Connect the parking brake release actuator electrical connector.

14. Lower the vehicle.

15. CAUTION:  Calibrate the electric park brake using Jaguar approved diagnostic system. If the Jaguar approved diagnostic system is not

available disconnect the battery for approximately 30 seconds, the vehicle will then prompt the driver to carry out the calibration
procedure as per the vehicle hand book on re-connection.

Calibrate the electric parking brake module using the Jaguar approved diagnostic system.

16. Refill the fuel tank.

Parking Brake Cable > < Parking Brake Release Actuator - VIN Range: G00001->G03445 (70.35.45)|Page 4864