XJ (X350) V8-4.2L (2005)
/v8-4.2l/Page-361009.png)
^
Tighten to 120 Nm.
22. Remove the special tool from the right-hand cylinder head.
23. Remove the special tool from the left-hand cylinder head.
Vehicles without supercharger
24. Install the right-hand variable camshaft timing oil control unit housing.
^
Install new O-ring seals.
^
Tighten to 22 Nm.
All vehicles
25. Remove the special tool.
26. Install the crankshaft position sensor.