jaguar Workshop Repair Guides

Jaguar Workshop Service and Repair Manuals

LH, VIN G00442->G45703|Page 1711 > < Fuel Pressure Release|Service and Repair|Page 1706
Page 1
background image

Valve Cover: Service and Repair
LH, VIN G00442->G45703

Valve Cover LH - VIN Range: G00442->G45703 (12.29.43)

Removal

All vehicles

1. Remove the air cleaner. Refer to Fuel Delivery and Air Induction. 

2. CAUTION:  If power steering fluid comes into contact with the paint work, the affected area must be immediately washed down with

cold water.

Detach the cower steering fluid reservoir.

3. Remove the ignition coil-on-plug cover.

4. Remove the oil level indicator and tube.

^

Remove and discard the O-ring seal.

Vehicles without supercharger

5. Remove the left-hand engine cover bracket.

6. Detach the engine wiring harness.

1) Disconnect the variable camshaft timing (VCT) oil control solenoid electrical connector.
2) Detach the engine wiring harness.

LH, VIN G00442->G45703|Page 1711 > < Fuel Pressure Release|Service and Repair|Page 1706