Repair Instructions for Timing Cover on XJ (X350) V8-42L (2005) (VIN G00442->G45703)
/v8-4.2l/Page-429004.png)
4. NOTE: Check crankshaft pulley and locking ring for damage.
Clean all crankshaft pulley mating faces.
5. CAUTION: The screw thread in the crankshaft must be cleaned out before a new crankshaft pulley bolt is installed.
CAUTION: A new crankshaft pulley bolt must be used.
Install, but do not tighten, a new crankshaft pulley retaining bolt.
^
Install the crankshaft pulley and locking ring to the crankshaft.
6. CAUTION: Under no circumstances should the crankshaft setting peg 303-645 be used in the following operations to lock the crankshaft.
Using special tools, retain the crankshaft pulley.
^
Tighten the crankshaft pulley retaining bolt to 375 Nm.