XJ (X350) V8-4.2L (2005)
/v8-4.2l/Page-430009.png)
All vehicles
12. Install the accessory drive belt idler pulley.
^
Tighten to 61 Nm.
13. Install the power steering pump.
^
Tighten to 25 Nm.
14. NOTE: Remove the blanking caps.
Connect the power steering pump to steering gear high-pressure line.
^
Install a new O-ring seal.
^
Tighten to 25 Nm.
15. Raise the vehicle.
16. Connect the AIR control valve to exhaust manifold tube.
^
Tighten to 35 Nm.