XJ (X350) V8-4.2L (2005)
Auxiliary Footwell Vent/Duct Blend Door Actuator
Auxiliary Footwell Vent/Duct Blend Door Actuator
Removal
1. Remove the floor console.
CAUTION: Make sure no damage occurs to the auxiliary temperature blend door actuator link rod.
2. Detach the footwell vent/duct blend door actuator link rod.
3. Disconnect the footwell vent/duct blend door actuator electrical connector.
4. Remove the footwell vent/duct blend door actuator.
-
Remove the footwell vent/duct blend door actuator retaining screws.
Installation
1. To install, reverse the removal procedure.
Auxiliary Temperature Blend Door Actuator
Auxiliary Temperature Blend Door Actuator
Removal
1. Remove the floor console.
CAUTION: Make sure no damage occurs to the auxiliary temperature blend door actuator link rod.
2. Detach the auxiliary temperature blend door actuator link rod.