XJ (X350) V8-4.2L (2005)
Headlamp Alignment Actuator: Service and Repair
Headlamp Leveling Motor
Removal
1. Remove the headlamp assembly.
2. Remove the headlamp leveling motor cover.
3. Disconnect the headlamp leveling motor electrical connector.
4. Rotate and remove the headlamp leveling motor.
-
Make sure the internal pivot is disengaged from the slide.
Installation
1. To install, reverse the removal procedure.
-
Make sure the internal pivot is located in the slide.
2. Check the headlamp adjustment.