XJ (X350) V8-4.2L (2005)
7. Install the rear subframe rear retaining bolt.
-
Install a new retaining bolt.
-
Tighten to 125 Nm.
NOTE: Left-hand shown, right-hand similar.
8. Tighten to 48 Nm.
9. Remove the special tool.
NOTE: Right-hand shown, left-hand similar.
10. Attach the rear air springs.
-
Tighten to 133 Nm.
Vehicles with Brembo brakes
CAUTION: The brake caliper must be supported at all times.
NOTE: Left-hand shown, right-hand similar.
1. Attach the brake caliper.
-
Remove the tie strap.
-
Install new brake caliper retaining bolts.