XJ (X350) V8-4.2L (2005)
/v8-4.2l/Page-829007.png)
4. Detach the throttle body.
5. Remove and discard the gasket.
NOTE: Cap the coolant hoses to minimize coolant loss.
6. Remove the throttle body.
-
Detach the coolant hoses from the throttle body.
Installation
CAUTION: Do not attempt to clean the throttle body. The bore and the throttle plate has a special coating applied during manufacture which should not
be removed.
1. To install, reverse the removal procedure.
-
Install the new throttle body gasket.
-
Tighten to 10 Nm.
