XJ (X350) V8-4.2L (2005)
/v8-4.2l/Page-1181001.png)
Stabilizer Link: Service and Repair
Rear Suspension
Stabilizer Bar Link
1. Remove the wheel and tire.
2. NOTE: Left-hand shown, right-hand similar.
Remove the stabilizer bar link retaining nut dust cover.
3. NOTE: Right-hand shown, left-hand similar.
Detach the stabilizer bar link.
4. NOTE: Right-hand shown, left-hand similar.
Remove the stabilizer bar link.
Installation
1. To install, reverse the removal procedure.
Tighten to 48 Nm.
