XJ (X350) V8-4.2L (2005)
Shift Cable: Service and Repair
Selector Lever Cable and Bracket (44.15.08)
Removal
1. Remove the floor console.
2. Move the transmission selector lever to the "R" position.
3. Detach the wiring harness bracket.
^
Reposition the wiring harness.
^
Detach the wiring harness bracket.
4. Detach the selector lever cable.
^
Loosen the selector lever cable retaining nuts.
5. Detach the selector lever cable.
6. Detach the selector lever cable.
7. Raise and support the vehicle.