XJ (X350) V8-4.2L (2005)
4. NOTE: Make sure the selector lever cable grommet is seated correctly.
Attach the selector lever cable.
5. NOTE: Fully extend the selector cable, then retract the selector cable one detent.
Make sure the selector lever cable is in the "R" position.
6. Make sure the transmission selector lever is in the "R" position.
7. Attach the selector lever cable.
^
Do not tighten the selector lever cable retaining nuts.
8. Connect the selector lever cable.
9. Adjust the selector lever cable retaining nuts to lock against the retaining bracket without moving the set position of either the shift lever or the
selector lever cable.
^
Do not tighten the selector lever cable retaining nuts.
10. NOTE: Make sure all transmission selector lever positions are illuminated to indicate the selected gear and the automatic transmission selects the
relevant transmission state.
Move the transmission selector lever to all positions.