XJ (X350) V8-4.2L (2005)
/v8-4.2l/Page-943003.png)
^
Tighten to 108 Nm.
4. CAUTION: Make sure the driveshaft centre bearing is correctly aligned to the driveshaft. Failure to follow these instructions may result in
damage to the vehicle.
Carry out the Driveline Angle Inspection.
5. Install the driveshaft heat shield retaining bolts.
^
Tighten to 7 Nm.
6. Install the support bracket.
^
Tighten to 9 Nm.
7. Install the exhaust system.
