XJ (X350) V8-4.2L (2005)
4. Install the rear window finisher to the rear window glass.
-
Install new rear window finisher retaining clips.
5. Apply glass primer to the mating face of the body flange.
6. Cut adhesive nozzle to achieve a triangular section bead 7 mm (0.28 in) wide by 10 mm (0.39 in) high.
7. Using a suitable pneumatic application gun, apply a uniform bead of adhesive to the windshield glass edge commencing at the bottom center and
overlapping the ends approximately 20 mm (0.79 in).
8. CAUTION: When installing the rear window glass, do not strike it in any way as this will crack the rear window glass. Failure to follow
this instruction may result in damage to the component.
With assistance carefully install the rear window glass into the aperture and press firmly into place.