XJ (X350) V8-4.2L SC (2004)
8. NOTE: Engine shown removed for clarity.
Detach the exhaust gas recirculation (EGR) valve.
^
Remove and discard the retaining nuts and gasket.
9. NOTE: Engine shown removed for clarity.
Remove the right-hand exhaust manifold heat shield/gasket retaining bolt.
10. Remove the exhaust manifold.
^
Remove and discard the retaining bolts and heat shield/gasket.
Installation
All vehicles
1. CAUTION: Make sure that the exhaust manifold and heat shield/gasket is correctly aligned to cylinder head.
Install the exhaust manifold.
^
Loosely install new retaining bolts and a new heat shield/gasket.