XJR (X300) L6-4.0L SC (AJ16) (1995)
XJ12
HIGH SIDE PORT - Compressor outlet flange
LOW SIDE PORT - Compressor intake pipe - Right side of engine near timing cover.
^
Torque the pressure cutout switches to 3.5 - 6 lb ft (5 - 8 Nm). Do not exceed 6 lb ft.
WARNING
DO NOT EXCEED 6 lb ft (8 Nm) TORQUE WHEN TIGHTENING PRESSURE CUTOUT SWITCHES. Overtightening will result in failure of the
Schrader valve causing liquid refrigerant to be discharged when the switch is removed.
VIN 720580 ON - SCHRADER VALVES
^
It is not necessary to depressurize the system on these vehicles when removing the dual (binary) or triple (trinary) pressure cutout switches.
^
Torque the pressure cutout switches to 3.5 - 6 lb ft (5 - 8 Nm). Do not exceed 6 lb ft.