XJR (X300) L6-4.0L SC (AJ16) (1995)
Rear Door Panel: Service and Repair
Rear Door Glass Lift Switch/Ashtray Veneer Panels
Fig. 1
-
Displace and remove the window lift assembly end cover trim pad.
-
Undo and remove the veneer panel to switch assembly se curing screw.
-
Displace and remove the veneer panel (Fig.1) from the forward securing clip.
-
Place panel aside.
Refit in the reverse order of the removal procedure.
NOTE: Fig.1 shows rear door components only.