XJR (X300) L6-4.0L SC (AJ16) (1995)
5.
Move the liner to access the new holes. Clean the holes and paint any exposed metal with a zinc rich paint.
6.
Refasten the liner and brake cooling duct.
7.
Fit an additional fastener (part number KTC 100007) through the hole in the liner into the body panel.
8.
Repeat the operation on the opposite wheel arch liner.
PARTS INFORMATION:
PART NUMBER
DESCRIPTION
QTY
KTC 100007
Fastener
2
WARRANTY INFORMATION:
Technical Service Bulletin # 76102
Date: 950301
Front Wheel Arch Liner - Noise During Tight Turns
76-102
Amended
3/95
Front Wheel Arch Liner - Noise During Tight Turns - Repair Procedure
MODEL
XJR Sedan 1995 MY
VIN 720001 - 723157
DATE
1/95
Remove and destroy Bulletin 76-102, Date 1/95.
Replace with this Bulletin.
Revisions are marked with a bar and indicated in Bold Text
ISSUE:
Noise from the front wheel arch area during tight turns. The front tires of 1995 MY XJR Sedans from VIN 720001 - 723157 may contact the wheel arch
liner during full lock turns.
ACTION:
If a customer complains of noise during tight turns from the wheel arch area on a 1995 MY XJR Sedan within the listed VIN range, add an additional
wheel arch fastener following the procedure described below.
WHEEL ARCH MODIFICATION PROCEDURE
1.
Remove both front wheels.