XJR (X300) L6-4.0L SC (AJ16) (1995)
Drink Holders: Service and Repair
-
Remove the console glove box lid.
-
Undo and remove the inner lid securing screws.
-
Displace and remove the inner lid.
-
Open the cupholder.
-
Undo and remove the cupholder trim panel securing screws.
-
Displace and remove the trim panel assembly by releasing the lower edge and then displacing upwards.
-
Displace and reposition the cupholder assembly from base (cupholder remains captive by spring).
-
Using a suitable implement. disconnect the the spring from the base and remove the cupholder.
Fig. 1
-
Disconnect the return spring from the cupholder and place the cupholder aside.
Refit in the reverse order of the removal procedure.