XJR (X300) L6-4.0L SC (AJ16) (1995)
/l6-4.0l_sc_(aj16)/Page-1925001.png)
Trim Panel: Service and Repair
'B' Post Upper Trim Pad
-
Position front seat and squab fully forward.
-
Remove seat belt lower anchorage and feed the belt through the lower trim aperture.
-
Remove seat belt upper anchorage.
-
Remove trim finisher upper seat belt aperture and door aperture edge trim.
-
Release upper trim pad from its fixings by exerting downward pressure.
Refit in the reverse order of the removal procedure.
WARNING: ENSURE THAT THE SEAT BELT IS CORRECTLY ASSEMBLED AND FIXINGS TORQUE TIGHTENED.