XJR (X300) L6-4.0L SC (AJ16) (1995)
13.
The PDU will then establish communications with the instrument pack.
14.
The PDU displays the message "Please wait" while it reads the software version from the pack along with the calibration values.
15.
If the calibration is correct, no reprogramming is required. If incorrect, the PDU disables the gauges and writes new values, then reactivates the
gauges.
16.
The PDU will display a message to indicate if the reprogramming was successful. The PDU then returns to the VIN screen.
PARTS INFORMATION:
DESCRIPTION
PART NUMBER
Oil pressure switch
LNA 5642CA
NOTE:
This switch is installed in production from the following engine serial numbers onward:
6 cyl.
Serial Number 9J134O2O
V12
Serial Number 8E11876
WARRANTY INFORMATION:
FAULT
R.O.TIME
CODE
NUMBER
DESCRIPTION
ALLOWANCE
MC DB FW
88.25.07
Fit oil pressure switch
6 cyl.
0.95 hrs.
V12
0.50 hrs.
Labor time includes the time to reprogram the instrument pack.
PDU SOFTWARE RELEASE
SERVICE ACTION DISC VERSION 1.0
Service Action Disc Version 1.0 is designed to reprogram the instrument pack oil pressure gauge after the oil pressure sensor is replaced by a new oil
pressure switch.