XJR (X300) L6-4.0L SC (AJ16) (1995)
-
Slacken the tensioner pulley adjusting bolt (2 Fig. 1) to release the belt tension. Remove and discard the supercharger drive belt.
-
Fit a new supercharger drive belt making sure that it is correctly aligned with the pulleys.
-
Tighten the tensioner pulley adjusting bolt to obtain the correct new belt tension. See Specifications.
-
Tighten the tensioner pulley securing bolt.
-
Drive the vehicle for at least 10 minutes. Allow the belt to cool to ambient (approximately one hour) and reset to the in-service tension. See
Specifications.
-
Lower the vehicle on the ramp.
Supercharger Belt, Tensioner Pulley
SUPERCHARGER DRIVE BELT TENSIONER PULLEY, RENEW
-
Raise the vehicle on a ramp.
-
Remove the supercharger drive belt.