XJR (X300) L6-4.0L SC (AJ16) (1995)
Battery Power Supply
The symbol represents a direct battery power supply and refers the user to figure 01.1, 01.2, 01.3
Use the Hyperlink to access Figure Numbers referred to in the wiring diagram. Refer to -- Vehicle / Diagrams See: Diagrams/Electrical Diagrams
Ignition Switched Power Supply
Ignition Switched Power Supply
This symbol represents ignition switched power supply and refers the user to figure 01.4. The suffix I indicates auxiliary power. Power is supplied
in ignition switch key positions I (Auxiliary) and II (Ignition). The suffix II indicates ignition power. Power is supplied in ignition switch key
position II (Ignition) and II (Ignition) and III (Engine Crank).
Ignition Switched Ground
Ignition Switched Ground
This symbol represents an ignition switched ground and refers the user to figure 02.1.
No suffix indicates Crank. Ground is completed in Ignition switch key position III (Engine Crank). The suffix I indicates auxiliary ground. Ground
is completed in ignition switch key position I (Auxiliary) and II (Ignition). The suffix II indicates ignition ground. Ground is completed in Ignition
switch key position II (Ignition) and II (Engine Crank).
Use the Hyperlink to access Figure Numbers referred to in the wiring diagram. Refer to -- Vehicle / Diagrams See: Diagrams/Electrical Diagrams
Logic Ground
Logic Ground
This symbol represents a logic ground and refers the user to figure 02.2.
Figure Number Reference Flag
Figure Number Reference Flag
This symbol refers the reader to a figure number only. It does not refer to a flag with the same number on a different figure. As used in figure 01.1
through 02.2, the reference flag refer the user to a continuation of the circuit. In this instance, the user matches the number to a power supply or
ground symbol to trace the circuit.
BPM because the body processor module appears numerous times, the abbreviation BPM is used in the reference flag on figure
Use the Hyperlink to access Figure Numbers referred to in the wiring diagram. Refer to -- Vehicle / Diagrams See: Diagrams/Electrical Diagrams
Control Module Input, Output, Data Line And Signal Ground
Control Module Input, Output, Data Line and Signal Ground
These four symbols are employed to assist the user in visualizing the 'logic' of circuits containing control modules. The symbols identify control
module input, output, data line and signal ground pins. These symbols are also employed on the corresponding data page.
Key to Wiring Diagrams